Friends, today in this article we will learn about the types of electronic regulators. I am going to give information about all these in a very good way. So let’s start.
Types of electronic regulators
Based on the functioning, there are the following types of electronic regulators-
- Movable Type Regulator- This type of regulator works easily in movable state. Different steps are not used in it. In this, by rotating the regulators in clockwise direction, the speed of the fan starts increasing whereas to reduce the speed of the fan, it is rotated in the opposite direction. Their cost has been determined differently by different companies. Its structure is of the following type-
- Step Type Regulator- In this type of regulators, steps from 1 to 5 are given for changing the speed. The speed is low at the first step stage and on advancing the step, the value of speed is high and the value of current is also high, due to which the value of heat is reduced. Their cost is higher than the moving type of regulators.
If low speed fans are used in homes, then step type regulators are used. This type of regulators are used for brushless motors.
3. Electric Regulator These are traditional regulators. They were first used to control the speed of fans. They work with a simple structure. Electric controller switches are used in them.
There is a large gap between the two stages of speed change in these, hence it is not possible to change the speed as per requirement. These regulators are available at low cost but their maintenance cost is high. In case of low speed in electric regulators, more heat is dissipated.
What did you learn today :-
Now you must have known the types of electronic regulators and you must have got the answer to all these questions well.
I hope you liked the information given by me, if you have any question/suggestion in your mind, then you can tell me by commenting below, I will definitely reply to your comment. If you liked this post, then you can also share it with your friends and relatives.